Phatronics Splitme Plus Passive Guitar Splitter with German isolated output transformer Free Ship

Description

The Phatronics Splitme Plus is a passive splitting device with the highest possible signal fidelity.

Its applications range from splitting signals and eliminating hum, to balancing and reamplification along with any signal routing that requires a clean signal free from noise.

It features a high end proprietary isolated output transformer. It isolates the two outputs, eliminating any possibility of ground loops or hum.

By using the phase inverter switch you can flip the signal phase at the ISO output, preventing phase cancellation from impairing signal reproduction.

The classic application for the SPLITME PLUS is splitting an input signal to two outputs, enabling you to connect an instrument to two devices, which may, for example, be two amplifiers, or an amp and a mixer/recording unit (PC/DAW).

Another useful application for the SPLITME PLUS is as a hum suppressor. Frequently background noise caused by ground loops occurs when two electronic devices are connected to each other. The SPLITME PLUS provides a simple, but extremely effective remedy when installed between the two units. Using the isolated output transformer.

The Splitme Plus performs all its functions without any need for a power supply. It is 100% Passive.

• Completely handmade
  • Point to point wiring
  • Custom 3D printed case
  • Premium electronic components
  • 1x 1/4 input jack
  • 2x 1/4 output jacks
  • 1x Direct Output
  • 1x Right output 100% isolated by 600ohm 1:1 German output transformer
  • Small footprint
  • Phase switch

Perfect for recording guitars.
1. Plug guitar yo input.
2. Plug one output to your amp.
3. Plug other output to direct in of your interface to record direct guitar signal.
Now that you have a direct guitar signal recorded, you can always use the Reamper to reamp the guitar.

The Splitme Plus DI Guitar Splitter can also be used for many other applications including live with multiple amps.